Whether you have a simple project such as hanging a mirror or picture on a wall or a complex task like laying floor tiles, the objective is to get everything in a straight line. However, you need the right tool to achieve such geometry, and the best equipment to use is a laser level. Unlike a manual level, a laser level helps demarcate a straight line accurately and efficiently. That said, choosing the right laser level requires one to be aware of the different models available in the market. This article delves into the most common types of laser levels and their suitability in different applications.

Line Laser Level

The most common type of laser level used in construction sites is the line laser. As its name suggests, a line laser level projects a horizontal or vertical line to the surface in question for easy spotting. Notably, the laser level produces two types of projections: forward projection and 360-degrees projection. Forward laser projection illuminates a line on the wall it is pointing. On the other hand, 360-degrees projection illuminates a straight line on all four walls in a room. When buying a line laser level, get one with green and red beams. A red beam is perfect for indoor projects, while the green one is suitable for outdoor projects since it is visible in sunlight. That said, line laser levels are commonly used for basic levelling projects, such as installing cabinets, a drop ceiling or framing a deck.

Spot Laser Levels

Also referred to as a dot or plumb laser level, a spot laser differs from a line laser in that it projects a tiny circle onto a wall rather than a straight line. The dots projected on wall surfaces by a spot laser act as level reference points to ensure plumbing accessories fit during construction. Spot laser levels are helpful when installing plumbing pipes, electrical cabling, HVAC and wall joists. Additionally, a spot laser level makes installations on storey buildings easier since it produces multiple dots across a single plane for easy referencing. Notably, the 3-spot and 5-spot laser levels are the two most common models.

Rotary Level Lasers

As its name suggests, a rotary level laser features a rotating laser that allows the equipment to cast a beam around a job site. Rotary laser levels are relatively large and must be mounted on sturdy tripods. Typically, a rotary laser level projects a beam horizontally, but you can lay it on its side using a trivet to project light on a vertical plane. Typically, a rotary laser level requires a laser detector or receiver for enhanced visibility in excess light conditions. Rotary laser levels are useful for tiling, aligning and levelling floors.

For more information about laser levels, contact a supplier.

Share